Voyager I
Nitrox Fill Station
Description:
Standard Accessories
- Fully Featured for Automatic Operation
- 10 CFM Nuvair Membrane System
- (2) O2 Analyzers (Permeate and Fill O2 Analyzer)
- Electric Power (Single or Three Phase)
- High Pressure Compressor Pumps: Air to 4500 psi / Nitrox to 3600 psi
- Low Pressure Compressor Pumps Air to 175 psi for Membrane Supply
- Norgren LP Air Filtration
- Automatic Dial A Pressure (DAP) Shut Down
- Automatic LP / HP Condensate Drains
- Cabinet Temperature Gauge
- Push Button On / Off Motor Starters
- LP and HP Hour Meters
- External Oil Sight Gauge, Fill and Drain
- Cooling Fans
- High Cabinet Temperature Shut Down
| LP Compressor: |
Capacity @ 175 psi: 23 CFM (665 L/min)
Horsepower - Electric: 7.5 hp (5.5 kW) |
| HP Nitrox Compressor: |
Output: 8.4 CFM, F.A.D. (240 L/min)
Charge Rate: 9.5 SCFM*
Fill Time: 8.5 minutes
Horsepower - Electric: 7.5 hp (5.5 kW) |
| Volume Tank Capacity: |
15 gal (57 L) |
| Full Load Amps: |
230V E1 50 or 60 Hz**: 53 A
230V E3 50 or 60 Hz: 49 A
400V E3 50 Hz: 28 A |
| Dimensions: |
height: 52 in (133 cm)
width: 38 in (97 cm)
depth: 49 in (125 cm)
weight: 840 lbs (382 kg)
|
| Membrane Input: |
Operating Pressure: 90 - 170 psi (6 - 12 bar)
Supply Air Volume: 13 - 25 SCFM (354 - 708 L/min)
Optimum Temperature: 110 +/- 5° F(43 +/- 3° C) |
