MCH-6/EM Stainless Steel w/ Automated Equipments
| Charging rate: |
80 L/min - 4.8 m³/h - 2.8 CFM |
| Filling time cylinder 10L 0-200Bar: |
25 Minutes |
| Working Pressure: |
225 Bar / 3300 Psi |
| RPM Pumping Unit: |
2240 |
| Driven By: |
Single-phase electric motor with centrifugal switch |
| Power: |
2.2 kW |
| Full Load Amp: |
14A(230V-50/60Hz) 29A(115V-60Hz) |
| Dimensions: |
height 35cm/13.7", width 65cm/25.5", depth 39cm/15.3" |
| Dry Weight: |
39.5 Kg / 87 lbs |
| Noise Pressure: |
81.7 dB |
| Number of Stages and Cylinders: |
4 |
| Lubricating Oil Capacity: |
300 cc (0.3 L) / 10 FL OZ |
| Lubricant: |
Coltri Oil CE 750 |
| Frame: |
Powder Coated Steel |
| Oil/Moisture Separator: |
After last stage with vortex generator |
| Filtration: |
Filter cartridge activated carbon and molecular sieve |
| Safety Valve: |
On the separator housing 225-300-330 Bar |
| Interstage Coolers and After Coolers: |
Stainless Steel |
| Suction Filter: |
2 micron paper |
| Breathing Air: |
EN 12021 CGA E |
